Team
Product 1
Scope X
Developed at IIT Palakkad by BumbleBee Instruments, Scope-X is an all-in-one electronics learning PCB with an integrated breadboard. It combines a 2-channel 500 kHz oscilloscope, signal generator, digital I/O, and multi-rail DC power supply (5V, 3.3V, ±12V), enabling convenient op-amp, logic, and FFT circuit experimentation from home or lab.
Sector
Consumer Goods
Industry
Consumer Electronics
Model
Marketplace
Platform
D2C
Technology
Semiconductors
Sensors
Developed in-house at IIT Palakkad by BumbleBee Instruments Pvt. Ltd., Scope-X is an all-in-one learning and measurement PCB designed for students, hobbyists, and researchers. It integrates the functionality of a 2-channel oscilloscope, function/signal generator, digital I/O interface, and multi-rail DC power supply onto a single compact board with an integrated breadboard for prototyping.
Key Applications & Use Cases- Op-Amp Experimentation: Circuit analysis and response testing for operational amplifier configurations.
- Frequency Analysis: Fast Fourier Transform (FFT) and frequency response sweeping.
- Digital Logic Testing: Prototyping and testing logic gates, sequential circuits, and digital I/O interactions.
- Home & Lab Prototyping: Powered directly with on-board DC supply rails and built-in breadboard area.
1. Oscilloscope
Feature | SpecificationChannels | 2 Channels (STORE mode enables visualization of unlimited waveforms referenced to the same clock)
Analog Bandwidth | 500 kHz
Sampling Rate | Max 1 Msamples/Sec at 8 Bits/Sample
Input Impedance | 1 MΩ
Input Voltage Range | Up to ±15V
Trigger Modes | CH1, CH2 with rising/falling edge detection
Gain Settings | Digitally controllable: x1, x2, x5
DC Offset | Digitally controllable up to ±10V (at x1 Gain)
Math Operations | CH1 – CH2, FFT CH1, FFT CH2
Display Modes | CH1, CH2, XY mode
Capture Modes | Single Shot, Repeat, Store
File Operations | Read / Save capture data as .csv files
2. Signal Generator
Feature | SpecificationWaveforms | Sine, Square, Triangle, Ramp, Arbitrary
Frequency Range | Up to 25 kHz (Sine); Up to 15 kHz (Square, Triangle, Ramp, Arbitrary)
Output Impedance | 1 kΩ
Amplitude Range | User-settable from 0.5V to 10V
DC Offset | User-settable up to ±10V
Frequency Analyzer | Linear / Logarithmic Sine sweep from 100 Hz to 10 kHz (Max 200 points)
3. Digital I/O & Clock Generator
Feature | SpecificationDigital Channels | 4 Inputs / 4 Outputs
Logic Level Standard | 3.3V CMOS
Frequency Generator | 1 Hz to 100 kHz (3.3V CMOS logic level, 1 kΩ output impedance)
4. Power Supply Rail Outputs
- AC/DC Input: 220V AC to 5V DC Adapter (included)
- 5V DC Output: Max 500 mA
- 3.3V DC Output: Max 500 mA
- ±12V DC Output: Max 33 mA